Magnesium plate
WE series magnesium alloys are magnesium based with Gadolinium,
Yttrium, Zinc and Zirconium. It covers WE43,WE54 and WE94.All those
are high strength casting alloys which can be used in temperatures
of up to 300oc (572of). The alloys have good mechanical properties
coupled with excellent corrosion resistance. The alloys are widely
applied in : Helicopter transmissions, power systems, aero-engines,
sports cars, missiles.
Specification | Chemical (%) |
Y | Gd | Nd | Zn | Zr |
WE54 | 4.71-5.5 | 1.0-2.0 | 1.5-2.0 | - | 0.4-1.0 |
WE43 | 3.7-4.3 | 0-1.9 | 2.0-2.5 | - | 0.4-1.0 |
WE94 | 3.5-4.5 | 8.5-9.5 | - | 1-1.5 | 0.4-0.7 |
Specification | Thermal Treatment Status | Tensile Properties |
0.25% Proof Stress | Tensile Strength | Elongation % |
(Mpa) | (Mpa) |
WE43 | T5 | 234 | 306 | 8 |
Specification | Thermal Treatment Status | Tensile Properties |
0.25% Proof Stress | Tensile Strength | Elongation % |
(Mpa) | (Mpa) |
WE54 | T5 | 205 | 280 | 4 |
Specification | Thermal Treatment Status | Tensile Properties |
0.25% Proof Stress | Tensile Strength | Elongation % |
(Mpa) | (Mpa) |
WE94 | T5 | 370 | 450 | 6 |
Applications
Sheet and plate in AZ31B find application in medium strength
service at temperatures below 150°C. Diverse uses including
aerospace, aircraft, concrete tools, 3C (cell phone / camera /
computer), speaker cones and textile machinery can all benefit from
light weight AZ31B.
AZ31B is non-magnetic and has high electrical and thermal
conductivity filling the requirements for RFI and EMI shielding in
the electronics and computer industries.
Superplastic forming of AZ31B sheet at elevated temperatures allows
production of a wide variety of intricate parts for automotive
uses. Monocoque construction utilizing formed sheet can be adapted
to many commercial applications.
PHYSICAL PROPERTIES
Density: 1.78
Coefficient of thermal expansion: 26.8 x 10-6K-1
Specific heat: 1040 Jkg-1k-1
Thermal conductivity: 76.9Wm-1k-1
Electrical resistivity: 92nΩm
Modulus of elasticity: 45 x 109Pa
Poissons ratio: 0.35
Melting range: 566 - 632°C
HEAT TREATMENT
No thermal treatment is available for increasing the strength of
this alloy after fabrication.
MECHANICAL PROPERTIES
Alloy and Temper | Thickness (mm) | Yield Strength 0.2% offset (MPa) | Tensile strength (MPa) | Elongation In 5.65 √A (%) |
AZ31B-O | 0.5 – 1.5 | 125 | 221 | 10 |
1.5 – 6.3 | 105 | 221 | 9 |
6.3 - 75 | 105 | 221 | 8 |
AZ31B-H24 | 0.5 – 6.3 | 200 | 269 | 5 |
6.3 -9.5 | 179 | 262 | 7 |
9.5 – 12.7 | 165 | 255 | 8 |
12.7 - 25 | 152 | 248 | 8 |
25- 50 | 138 | 234 | 6 |
50 - 80 | 124 | 234 | 7 |
AZ31B-H26 | 6.3 - 10 | 186 | 269 | 6 |
10 – 12.5 | 179 | 262 | 6 |
12.5 - 20 | 172 | 255 | 5 |
20 – 25 | 159 | 255 | 5 |
25 - 40 | 152 | 241 | 5 |
40 - 50 | 148 | 241 | 5 |
The sheet and plate shall conform to the tensile requirements in
above Table unless other agreement is made between seller and
purchaser. Mechanical Properties for sizes and tempers not shown in
above Table shall be as agreed upon by seller and purchaser.
SURFACE TREATMENT
All the normal chromating, anodizing, plating, and finishing
treatment are readily applicable. AZ31B also responds well to
plasma electrolytic oxidation finishing.
